Home > Articles > Low-Carbon

Low-Carbon Articles

15/07/2026

The 4th Conference on Green and Low-Carbon Development in the Steel Industry Was Held in Nanping, Fujian

The 4th Conference on Green and Low-Carbon Development in the Steel Industry was held in Nanping. At the conference, the EPD Platform Development Report and a series of carbon emission factor standards were released.

Read More
03/07/2026

Baosteel's Low-Temperature Resistant Seamless Steel Pipes for the CCUS Project have been Shipped

Recently, Baosteel successfully completed the first batch of production and shipment of its independently developed large-diameter, low-temperature resistant, and high-toughness CO₂ seamless pipes.

Read More
03/07/2026

A seminar on the special steel industry’s response to the CBAM was held in Wuhan

This seminar focuses on the carbon tariff challenges facing China’s special steel industry following the formal implementation of the EU’s Carbon Border Adjustment Mechanism (CBAM). It features in-depth discussions on carbon accounting, compliance reporting and pathways to low-carbon transition.

Read More
16/06/2026

Launch meeting for the mandatory national standard on ‘Hot-rolled H-section steel for building structures’ held in Beijing

Work has officially commenced on drafting China’s first mandatory national standard for hot-rolled H-section steel used in building structures. The standard aims to establish a robust foundation for quality and safety.

Read More
29/04/2026

Malaysian Dong Steel's Hot-Rolled Coils Successfully Passed the EPD Audit

Recently, the hot-rolled coil products of Donggang Malaysia, an overseas subsidiary of Jianlong Group, successfully passed the rigorous audit of the Italian ICMQ organization EPDItaly©.

Read More
17/04/2026

The core section of China’s first full-specification stainless steel production line has been completed

The core structure of China’s first smart, flexible production line capable of manufacturing high-end low-carbon stainless steel in a range of thicknesses—from the world’s thinnest (1.85 mm) to the thickest (100 mm)—has been completed.

Read More
04/02/2026

Tata Steel partners with Jharkhand to advance green steel transformation

Tata Steel signed a memorandum of understanding with the Jharkhand state government on green steel technology cooperation, planning to invest approximately US$1.2 billion to build the low-emission HIsarna demonstration project, promoting local sustainable manufacturing and industrial upgrading.

Read More

Answers

What are the common specifications for stainless steel sheets in China?
Stainless Steel Sheets and Materials: 304, 316L, 321, 201, (301 coiled tubing); Domestic Stainless Steel Sheets: 430, 409, 201

Stainless steel sheet thickness：304 stainless steel sheet thickness: 0.12 mm–65 mm; 316L stainless steel sheet thickness: 0.5 mm–16 mm

Sheet surface finishes: 8K mirror finish, 2B polished finish, sandblasted (brushed, sandblasted), titanium finish, rice-grain finish, oil-finished brushed, Ba-finished

Sheet widths: 1000 mm × 2000 mm, 1219 mm × 2438 mm, 1219 × 3048, 1219 × 3500, 1219 × 4000, 1500 mm × 3000 mm, 1500 mm × 6000 mm
Why are the selection parameters for pull-out anchors so important?
The core value of pull-out anchors lies in transferring structural loads to deep, stable strata. However, many purchasers only focus on the pull-out force value, neglecting:
Deformation compatibility: Excessive deformation differences between the anchor and the surrounding soil can lead to stress concentration.
Corrosion tolerance: The erosion rate of metal anchors by underground chemical environments can vary by more than 10 times.
Construction error tolerance: Drilling deviations have drastically different effects on the bearing capacity of different types of pull-out anchors.
For example, in water-rich strata, using mortar pull-out anchors with anti-corrosion coatings can extend the lifespan by 3-5 years compared to ordinary steel strand anchors. These hidden costs are often only recognized after an accident occurs.
Hello, do you have anchor bolts? Could you provide a MTR. what are the yield strength and tensile strength of the anchor bolts? I need traceability for each batch number.
Yes, we supply anchor bolts and can provide a genuine MTR with full batch traceability. To give you an accurate quote and MTR sample, please let us know your required standard, grade, diameter, length, and quantity. You can contact us via WhatsApp at +86 198 6196 1658 to tell us your specific needs.

Hello, I am glad to see your purchase requirements for anchor bolts. We have anchor bolt products. There are no standardized values for the yield strength and tensile strength of anchor bolts; they depend primarily on the specific product standard, material grade, and specifications.
Please be assured. Considering your request for a factory test report (MTR) and traceability for each batch number, a proper MTR document will always include a unique heat number, which is crucial for material traceability. We can provide documents that meet these requirements.
You can tell us the specific standards and grades of the anchor bolts you need to purchase, as well as any other purchasing requirements, so we can provide you with a specific response based on your needs.


Timely Info	Independent	Platform	Multiple guarantees	Self-operated storage

About us	Channel	Useful tools
About China Steel Market	Prices	Steel Weight Calculation
Contact Us	Answers	Why Choose Us
Terms & Conditions	Inventory
Privacy Policy	Help

Low-Carbon Articles

Categories

Answers