In China, the standard size range of welded steel mesh can vary depending on the intended application and specific project requirements. However, here are some common size ranges:
1.Wire Diameter: The wire diameter for welded steel mesh typically ranges from 3mm to 10mm. The most commonly used diameters are 4mm, 5mm, and 6mm. However, smaller or larger wire diameters can also be available based on specific needs.
2.Mesh Size: The mesh size refers to the spacing between the wires in the steel mesh. Common mesh sizes include: Small Mesh: Mesh sizes ranging from 25mm × 25mm to 50mm × 50mm are commonly used for applications that require finer mesh spacing and higher strength. Medium Mesh: Mesh sizes ranging from 50mm × 50mm to 100mm × 100mm are commonly used for general construction purposes, such as concrete reinforcement. Large Mesh: Mesh sizes ranging from 100mm × 100mm to 200mm × 200mm or even larger are typically used in applications that require wider spacing and lower strength, such as fencing or animal enclosures.
3.Sheet Dimensions: The standard sheet dimensions for welded steel mesh are typically 2.4 meters wide and 6 meters long. However, it's important to note that custom sizes can also be produced based on specific project requirements.

Answers

• 
  What are the differences in thickness and production process between medium and thick steel plates and hot rolled steel plates? 20/12/2024 16:13:18
• 
  What are the differences between PE lining and plastic coating? 04/12/2024 17:18:59
• 
  What are the acceptance criteria for hot-dip galvanized square tubes? 03/12/2024 05:26:54
• 
  How to distinguish between 304 and 201 stainless steel plates? 29/11/2024 17:07:20
• 
  Stainless steel wire rope or galvanized steel wire rope, which one is stronger? 27/11/2024 15:03:48