The maintenance of stainless steel channel steel is reflected in many aspects. Its stainless steel material has good high temperature resistance. Stainless steel has excellent stainless steel corrosion resistance and better intergranular corrosion resistance. The following is the maintenance and upkeep of stainless steel channel steel.
1. Storage of stainless steel channel steel
Angle steel and stainless steel channel steel stacked in the open air should face downward, that is, the mouth should face downward. The I-beam should be placed vertically, and the stainless steel channel steel channel surface should not be facing upward to avoid water accumulation and rust. Round steel and square steel are stacked according to different steel types. Thin steel plates should be stored in dry warehouses and stacked separately according to heat number. Sleepers or small rocks should be placed underneath and ventilation should be provided under the accumulation.
Remove rust and apply oil, and spray anti-rust oil regularly for maintenance. The storage time is generally less than one and a half years.
It should be stored in a high, flat, clean place free of weeds and debris, and in a well-ventilated open yard. There should be no corrosive liquids such as acids, alkalis, and salts near the ground.
2. Rust removal of stainless steel channel steel
Because steel is often exposed to the air before use, it will react with oxygen and moisture in the air for a long time, causing corrosion, which is commonly known as corrosion. However, rust will affect the use of steel, causing cracks in the connections between steels, inaccurate placement of materials, delaying the progress of the project, and even causing the project to collapse. Therefore, steel must be rust-free every time before use.
3. Anti-corrosion of stainless steel channel steel
In the past, only two layers of anti-rust paint were sprayed (brushed) on the exposed steel, and there were no regular maintenance measures during use, so the effect of this method was not significant. The floor load-bearing plates are galvanized, but the effect is not ideal. In response to this specific situation, specific maintenance measures were formulated, such as stainless steel channel steel, steel sandblasting combined with electric steel brush rust removal technology, etc.

1. Storage of stainless steel channel steel
The open-pit piled steel and stainless steel must face downward, that is, the mouth faces downward. The I-beam should be placed longitudinally with the stainless steel channel facing upward to avoid water accumulation and rust. Round steel and square steel are stacked according to the steel number. Thin steel plates should be stored in a boring warehouse, stacked according to the furnace number, with sleepers or small corner stones laid underneath, and stacked for ventilation.
Apply rust removal oil when rust occurs, and apply anti-rust oil regularly for maintenance. The storage time is usually no longer than one and a half years.
Store on a high-terrain, flat site, free of weeds and garbage, on a floor with good pressure and in an open-air cargo yard with good ventilation. There should be no corrosive fluids such as acids, alkalis, and salts near the site.
2. Rust removal of stainless steel channel steel
Steel is often exposed to the air before use. Therefore, over time, the steel will undergo a series of chemical reactions with oxygen and moisture in the air, causing rust, commonly known as corrosion. However, rust affects the use of steel, gaps appear in the connections between steel, materials are incorrectly positioned, the project speed slows down, and the project collapses. Therefore, every time steel is used, the rust from the steel needs to be removed.
3. Anti-corrosion of stainless steel channel steel
Regarding the exposed steel, only two lines of anti-rust paint are sprayed, and there is no regular maintenance method during use, so the effect of this approach is not obvious. Chooses galvanizing, and its role is not too ambitious. Regarding this detail, stainless steel and other steel structures: choose the rust removal process of sandblasting and electric steel brush to completely remove the previous scale and rust and carry out anti-corrosion treatment.

Answers

• 
  What are the differences in thickness and production process between medium and thick steel plates and hot rolled steel plates? 20/12/2024 16:13:18
• 
  What are the differences between PE lining and plastic coating? 04/12/2024 17:18:59
• 
  What are the acceptance criteria for hot-dip galvanized square tubes? 03/12/2024 05:26:54
• 
  How to distinguish between 304 and 201 stainless steel plates? 29/11/2024 17:07:20
• 
  Stainless steel wire rope or galvanized steel wire rope, which one is stronger? 27/11/2024 15:03:48