Q:How should corrugated steel culverts be maintained and handled?

1. Strictly control the quality of raw materials for corrugated steel culverts. Corrugated pipes brought to the site must be stacked neatly and orderly, and no one should step on them. Corrugated steel culverts need to be covered and protected to prevent them from aging prematurely due to wind and rain.

2. The steel corrugated steel culvert should be cut straight, avoiding a beveled cut.

3. Method for corrugated steel culvert joint: The corrugated steel culvert joint should be wrapped with a 0.3-meter-long large corrugated pipe, and both ends should be tightened in half, with no gaps left in the base. To ensure that no empty space is left in the center, markings should be made at both ends of the connector. After finishing, wrap it tightly with tape.

4. When welding reinforcing bars near corrugated steel culverts, measures should be taken to protect the corrugated pipe from being burned. If it is accidentally burned, the burned area should be tightly wrapped with tape.

5. When dismantling the mold, take care to protect the corrugated steel culverts that are exposed at the ends.

For further questions regarding corrugated steel culverts, please refer to this article: FEATURE| Corrugated Steel Culvert: The Solution for Cost Reduction and Efficiency Improvement in Infrastructure Engineering

Time：01/12/2025 17:19:26